This Secondary Fuel Manager Fuel Filter Kit is suitable for a: Ford Ranger MY22, V6 3.0L
Year Model: 04/2022 – Current
Please note: This kit does not include a bracket. It is for installation on a vehicle that has previously had a Diesel Care Catch Can Kit part number DCC068 installed OR if these two kits are purchased together. It mounts both Catch Can and Fuel Filter on one bracket. If the two kits have been purchased together, the Catch Can Kit should be installed first.
Secondary filters, sometimes called a final filter are plumbed after the factory installed filter. Fuel passes through the factory filter first before continuing on to the secondary filter, then to the high pressure pump. The filter media in this Diesel Care Fuel Manager final filter is rated at 5 microns. A 5 micron final filter will remove particles the size of just 5 x 1,000th of a millimetre.
Diesel Care Fuel Filter Kits offer Premium Protection for your diesel fuel Injection system.
The heart of the diesel engine is the fuel injection system. Water, microbial growth (algae) or fine particles of dirt can cause damage to the pump and injectors. Worn or malfunctioning injectors can even lead to engine damage or failure. The most effective way to safeguard against problems is to install an additional fuel filter either before or after the factory filter. Filtering fuel twice greatly reduces the chance of contamination reaching the injection system and can save a whole lot of headaches.
SECONDARY (FINAL) KIT FEATURES
-
Provides an effective safety net if contaminants get through the factory filter
-
The 2 or 5 micron Fuel Manager filters effectively remove smaller abrasive particles, resulting in less wear on the pump and injectors
-
Effectively removes water if any gets through the factory filter
-
Prevents expensive repairs
-
Protects the fuel injection system
-
Ensures cleanliness of critical engine components
-
Helps maintain engine performance and efficiency
MAINTENANCE The Fuel Manager Secondary (Final) Fuel Filter has a removable fuel filter cartridge element with a membrane that collects contaminants in diesel fuel. The element should be replaced periodically, but less frequently than the primary and factory filters. The recommended frequency of change is every 40,000kms or every second time you change your factory filter, whichever comes first. The exception to this rule would be if you encountered contaminated fuel, in which case you should change the filters early.
The filter bowl should be visually checked for water and drained as required on a regular basis. Neglecting to drain water accumulation in the bowl may result in water entering the fuel injection system.
We recommend visually checking the bowl every 5,000km or earlier for your Ford Ranger MY22, V6 3.0L or 4cyl 2.0L
